About Us  | JAPANESE | THAI

Accessories

Digital Catalog

Foot Switch

Foot Switch for POWER PACK(Cable length: 1.5m)

FS201

[ON/OFF type]
Switch is ON while stepping on.

photo
VC302

[Variable type]
You can control rotation speed by tread adjustment.
Controllable range: 0(stop)~ MAX

photo

Power Cord for POWER PACK

Standard accessory with the POWER PACK(Cord length: 2m)

CA10

Input Voltage AC 100V

photo
CA11

Input Voltage AC 115V

photo
CA12

Input Voltage AC 230V

photo

Power Cord for Handpiece

D.C. cord(5 PIN plug):Only for Ver.2 handpiece and motor

CC7112

Curled cord(Length: 1.5m)

Power cord for Ver.2 handpiece and motor
Standard equipment to Ver.2 handpiece and motor.

photo

CB2112

Extension cord(Length: 2m)

Straight extension cord for connecting the POWER PACK and the curled cord(CC7112)

Two or more extension cords can not be connected.

photo

Plug for remote control

RPG-8P

[DIN 8PIN Plug]
This plug is used for controlling a handpiece via external input/output signals.

photo

Fuse

PFU-2.0A

For C2012/C2112

PFU-1.0A

[For C2212]

photo

Rubber Cradle

RM11

Handpiece stand made of rubber.
Can be used for all listed handpieces.

■Outside dimensions
 72(W)×72(D)×30(H)mm

photo

photo
Example of use

Aluminum Carrying Case

BX01

Carrying case(small)

■Outside dimensions

 365(W)×210(D)×280(H)mm
■Weight

 2.6 kg

photo

photo

BX022

Carrying case(large)

Outside dimensions
 470(W)×230(D)×340(H)mm
Weight
 4.2 kg

photo

photo

Drill Stand

DS52

With a Rotary Handpiece installed, the drill stand is used for boring, grinding and other similar purposes.
Can be used in combination with all listed handpieces except RECIPRON and Belt Sander.
The handpiece can be set both in vertical and horizontal positions.

Table Dimensions 200(W)×200(D)×22(H)mm
Weight 6 kg
Height of the Support 245 mm
Maximum Slide Stroke 25 mm
Accessories

Motor sleeve(1set)

photo

photo
Example of use