総合カタログVer6.0

351/702

348Applicable GrainApplication MaterialsGeneral Notes・Before using tools, make sure to check there is no flaw and crack.・Use tools with proper rotation speed.・Please make a trial run after mounting tool on grinder.　・Polishing with polishing compound should be operated within 200m/min in order to avoid dispersal of polishing compound and making a scratch.・Replace a bob every time polishing with a different grain.・Use whole bobs equally when polishing on the edge and avoid using one point consumption.・Please mount tools with care of overhanging; it should be within 13mm.Felt Points　Soft▲●●●●●●▲Felt Points　Hard●●●●●●▲▲Green Felt Points▲●●●▲Yellow Felt Points▲●●●▲FR Polishing Points●●●●●▲Cotton ▲●●●▲Cotton Mop▲●●●●Layer Felt▲●●●Flannel ▲▲●●ChamoisCleaning Polishing Wood Points　Soft▲▲▲●●●▲▲Polishing Wood Points　Hard▲●●●●●▲Sisal Bobs　Medium●▲Sisal Bobs　Soft●●▲Cotton Bob　Semi-finishing▲▲●●●▲Cotton Bob　Finishing▲▲●●●Ring Bob Wheel Felt▲●●●▲Ring Bob Wheel Cushion［Abrasive Nylon］Minute GrindingFelt Points　Soft▲●●▲▲▲▲Felt Points　Hard●●●▲●●▲Green Felt Points▲●▲●●Yellow Felt Points▲●●●●▲FR Polishing Points●●▲●▲●Cotton ▲●●▲●●▲Cotton Mop▲●●▲●●▲▲Layer Felt▲●●▲●●▲Flannel ▲●●▲●●▲●Chamois▲▲Polishing Wood Points　Soft●●▲Polishing Wood Points　Hard●●▲Sisal Bobs　Medium▲●●▲●●Sisal Bobs　Soft▲●●▲●●Cotton Bob　Semi-finishing▲●●▲●●▲Cotton Bob　Finishing▲●●▲●●▲Ring Bob Wheel Felt▲●●▲●●▲Ring Bob Wheel Cushion［Abrasive Nylon］●●●●▲Applicable GrainSemi-nishingFinishingFine-finishingMirror Finish＃400＃600＃800＃1200＃2000＃3000＃5000＃8000＃14000Applicable MaterialsMetal MaterialNon-Ferrous MetalNon-Metal MaterialＨＢ４８１～ＨＲＣ５０～ＨＢ２２６～３８１ＨＲＣ２０～４０Less than HB226Less than HRC20Super HardHardSoftSuper HardSuper Soft■Reference for overhangingOverhanged length of shank（mm）Allowable Rotation Speed of Tools（as a guide）20Maximum Speed×0.5 Times30Maximum Speed×0.3 Times40Maximum Speed×0.1 Times

※このページを正しく表示するにはFlashPlayer10.2以上が必要です