総合カタログVer6.0

213/702

210Non-Metal Material Metal Material Non-Ferrous MetalSelection Table of GrainsCarbon Tool SteelSK＊＊Quenching/TemperingHardHB481～HRC50～▲▲●●●▲High-Speed Tool SteelSKH＊＊Quenching/Tempering▲▲●●●▲Alloy Tool SteelSKS＊＊Quenching/Tempering▲▲●●●▲Martensitic Stainless SteelSUS440A～C・FQuenching/Tempering▲▲●●●▲Nickel Chrome SteelSNC＊＊Quenching/TemperingHB286～480HRC30～49▲●●●●▲Nickel-Chrome-Molybdenum Steel SNCM＊＊＊Quenching/Tempering▲●●●●▲Chrome steelSCr＊＊Quenching/Tempering▲●●●●▲Chrome Molybdenum Steel SCM＊＊＊Quenching/Tempering▲●●●●▲Manganese Steel SMh＊＊＊Quenching/Tempering▲●●●●▲Manganese Chromium SteelSMnC＊＊＊Quenching/Tempering▲●●●●▲Precipitation Hardening Stainless SteelSUS6＊＊▲●●●●▲Carbon Steels for Machine Structural Use S＊＊CNormalizing/AnnealingQuenching/TemperingSoftHB226～381HRC20～40▲●●●▲●Nickel Chrome SteelSNC＊＊Quenching/Tempering▲●●●▲●Heat Resistant Steel SUH＊＊＊Quenching/Tempering▲●●●▲●Gray IronFC＊＊＊▲●●●▲●Aluminium Chrome Molybdenum Steel SACM＊＊＊▲●●●▲●Martensitic Stainless Steel SUS4＊＊Quenching/Tempering▲●●●▲●Austenitic Stainless Steel SUS3＊＊▲●●●▲●Austenitic-Ferritic Stainless SteelSUS329J1▲●●●▲●Rolled Steels for General Structural UseSS＊＊＊Less than HB226Less than HRC20▲●●▲▲▲▲Carbon Steels for Machine Structural UseS＊＊CNormalizing/Annealing▲●●▲▲▲▲Heat Resistant Steel SUH＊＊＊Annealing▲●●▲▲▲▲Gray IronFC＊＊＊▲●●▲▲▲▲Austenitic Stainless Steel SUS3＊＊▲●●▲▲▲▲Ferritic Stainless Steel SUS4＊＊▲●●▲▲▲▲Rolled Steels for General Structural UseSS＊＊＊－●●●▲▲▲▲Carbon Steels for Machine Structural UseS＊＊CAnnealing●●●▲▲▲▲Cemented Carbide Super Hard▲CermetSuper Hard▲Beryllium Copper (Alloy 25)BeCu25Hard●▲▲Titanium α β　α-βHard●▲▲Hastelloy Hard●▲▲Phosphor BronzePB＊Hard●▲▲Inconel Alloy Soft●Beryllium Copper (Alloy 50)BeCu50Soft●Aluminium Bronze ABB＊Soft●Pure TitaniumSoft●MonelBC＊Soft●Bronze BS＊Soft●Brass Soft●AluminiumA＊＊＊＊Soft●CeramicsSuper Hard▲SiliconSuper Hard▲FerriteSuper Hard▲Quartz GlassSuper Hard▲StoneSuper Hard▲ResinSuper SoftRubber Super SoftWoodSuper SoftGeneral Notes・Before using tools, make sure to check there is no aw and crack.・Use tools with proper rotation speed.・Make sure whether grinder works properly before use. Moreover, please adjust circularity by dressing grinding stone.　・Please dress grinding stone in case of clogging. If clogging is often happened, please select another tool.・Please mount tools with care of overhanging; it should be within 13mm.■Reference for overhangingOverhanged length of shank（mm）Allowable Rotation Speed of Tools（as a guide）20Maximum Speed×0.5 Times30Maximum Speed×0.3 Times40Maximum Speed×0.1 TimesGC(C)SPHSPSAPAWAA/WA

※このページを正しく表示するにはFlashPlayer10.2以上が必要です